Gallery - Asbestos Surveying & Removal
Asbestos Pipe Lagging Removal
This task requires lots of time and the use of injection machine in order to wet this very fragile material.
Asbestos Insulation Board Garage Ceiling Removal
Projects like this usually take around 2 days and require a large amount of preparation and materials.
Asbestos Insulation Board Porch Ceiling and Soffits Removal
This is a typical licensed asbestos removal job under negative pressure with a decontamination unit.
Asbestos Insulation Board Removal Large Partition Wall
This is a typical licensed asbestos removal job under negative pressure with a decontamination unit.
Asbestos Insulation Board Removal - Less Than 1sqm
When AIB is smaller than 1sqm and the board can be removed without breakage, so essentially in one piece then this task can be carried out under semi-controlled conditions. Some of the procedures do not apply to this task so please contact us.
Asbestos Textured Coating Removal
Removal of Artex requires a large amount of preparation. The Artex is saturated with a special gel and carefully removed from the ceiling. Scraping off artex requires a large amount of time. Whenever possible the ceiling is removed along with the plasterboard.
Asbestos Cement Soffits Removal
Asbestos Cement Roof Removal
The biggest advantage over other contractors is that we can remove items from the garage to avoid any contamination and allow for vacuuming of the garage floor.
Asbestos Bitumen Adhesive Removal
This is one of the most challenging and expensive tasks. Bitumen is usually hiding in cracks and holes and removal of 100% of that product is sometimes not possible.